Canolight COB Strip 24V IP20 5m 9W/m

This 24V Canolight COB Strip is perfect for indoor use, specifically in kitchens and cabinets. With a single color and non-waterproof design, it provides a sleek and modern look while also being functional. Its 9W/m power output ensures efficient lighting, making it an ideal choice for any household.

 

LED Type

COB Single Color

Input Voltage

DC 24V

Width

8mm

Power

9W/m

Lumen

750lm/m

Length

5m (16ft)

Cuttable

Every 2 Inch Could Be Cut

IP rate

20, Non water-resistance

Dimmable

Yes, Dimmable driver requested. 

Certification

CUL

24V COB LED Strip Transformer Sizing Guide

This guide applies to standard 9W/m, 24V COB LED strip lights. Select the transformer according to the combined length of all LED strip sections connected to it.

Total LED Strip Length Recommended Transformer
Less than 8 ft 24W
8–13 ft 40W
14–20 ft 60W
21–32 ft 96W
33–64 ft 200W
65–96 ft 300W

Maximum Length for a Single Continuous Run

A single continuous LED strip run can be up to approximately 10 metres (32 feet), provided that the transformer has sufficient capacity and the low-voltage wire between the transformer and the LED strip is kept under approximately 2 feet.

Extending one continuous run beyond 32 feet may cause the far end of the strip to appear dimmer due to voltage drop. For longer installations, divide the LED strip into shorter sections and connect them to the transformer in parallel.

Important: If different LED strip sections are controlled by separate switches, each switch-controlled circuit will normally require its own transformer.

This chart is a general sizing guide for 9W/m, 24V LED strips. Actual requirements may vary depending on wire length, wiring layout and installation conditions.

Product Spec Sheet