Picovolt COB LED Strip Light IP20 – 24V DC, 8mm Width - 5m / 10m / 15m / 20m / 25m
Picovolt COB LED Strip Light – IP20 Indoor Linear Lighting
Upgrade your lighting with the Picovolt COB LED Strip, designed for seamless, dot-free illumination. Ideal for under cabinet lighting, cove lighting, display shelves, and architectural applications.
Key Features:
- COB Technology (Dot-Free) – Smooth continuous light without visible LED dots
- IP20 Rating – Designed for indoor dry locations only
- 24V DC Input – Stable performance with minimal voltage drop
- High Efficiency – Approx. 1080 lumens per meter
- Low Profile Design – Slim 8mm width for tight installations
- Flexible & Cuttable – Easy to install and customize
Applications:
- Under cabinet lighting
- Retail display lighting
- Cove and indirect lighting
- Shelving and architectural accents
- Residential & commercial interiors
Specifications:
- LED Type: COB (Chip-on-Board)
- Input Voltage: DC 24V
- Power Consumption: 9W per meter
- Luminous Output: ~1080 lm/m
- Width: 8mm
- IP Rating: IP20 (Indoor Use Only)
- Light Color Options: 3000K / 4000K / 5000K
Important Notes:
- IP20 rated – not waterproof, suitable for dry indoor areas only
- Use with compatible 24V LED driver
- Recommended to install with aluminum profiles for heat dissipation
24V COB LED Strip Transformer Sizing Guide
This guide applies to standard 9W/m, 24V COB LED strip lights. Select the transformer according to the combined length of all LED strip sections connected to it.
| Total LED Strip Length | Recommended Transformer |
|---|---|
| Less than 8 ft | 24W |
| 8–13 ft | 40W |
| 14–20 ft | 60W |
| 21–32 ft | 96W |
| 33–64 ft | 200W |
| 65–96 ft | 300W |
Maximum Length for a Single Continuous Run
A single continuous LED strip run can be up to approximately 10 metres (32 feet), provided that the transformer has sufficient capacity and the low-voltage wire between the transformer and the LED strip is kept under approximately 2 feet.
Extending one continuous run beyond 32 feet may cause the far end of the strip to appear dimmer due to voltage drop. For longer installations, divide the LED strip into shorter sections and connect them to the transformer in parallel.
This chart is a general sizing guide for 9W/m, 24V LED strips. Actual requirements may vary depending on wire length, wiring layout and installation conditions.