Votatec 3-Way LED Dimmer Switch – 150W LED/CFL, 600W Incandescent – 120V
Votatec 3-Way Slide Dimmer Switch
Control the brightness of compatible dimmable LED, CFL, halogen and incandescent lighting with the Votatec 3-way dimmer switch. Its decorator-style design combines a convenient on/off paddle with a side-mounted slider for smooth and simple brightness adjustment.
Rated for up to 150W of dimmable LED or CFL lighting and 600W of incandescent or halogen lighting. It is suitable for 120V residential and light-commercial lighting circuits.
Key Features
- Designed for 3-way lighting circuits
- Compatible with dimmable LED, CFL, halogen and incandescent lamps
- On/off paddle with separate brightness slider
- 150W maximum dimmable LED/CFL load
- 600W maximum incandescent/halogen load
- 7W minimum connected load
- 120V AC, 60Hz operation
- Decorator-style design
- Available in white or black
- Rated mechanical life of approximately 40,000 operations
- UL 1472 dimmer switch standard
- cULus listed
Specifications
| Model | BAK-004AG |
| Circuit Type | 3-Way |
| Input Voltage | 120V AC |
| Frequency | 60Hz |
| LED/CFL Load | Up to 150W |
| Incandescent/Halogen Load | Up to 600W |
| Minimum Load | 7W |
| Operating Temperature | -20°C to 60°C |
| Wire Specification | 18 AWG leads |
| Available Colours | White or Black |
How It Works
- Use the main paddle to turn the lights on or off.
- Move the side slider upward for brighter light.
- Move the side slider downward for lower light output.
- The selected brightness level can remain set for convenient everyday use.
3-Way Installation
In a typical 3-way application, this dimmer is installed at one control location and a compatible standard 3-way switch is installed at the other location. The dimmer controls the brightness, while either location can be used to switch the light on or off.
Only one dimmer should be used in the 3-way circuit unless the lighting system is specifically designed for multiple dimming controls.
Compatible Lighting
- Dimmable LED bulbs
- Dimmable LED fixtures
- Dimmable CFL bulbs
- Incandescent bulbs
- Halogen bulbs
Compatibility notice: The connected LED or CFL lamps must be marked as dimmable. Dimming range and performance may vary depending on the lamp, driver, fixture and total connected load. Non-dimmable lamps must not be used with this dimmer.
Installation Notice
Turn off power at the circuit breaker before installation. Installation should be completed by a qualified electrician in accordance with applicable electrical codes. Verify the wiring configuration, connected load and lighting compatibility before installation.
The connected load must be at least 7W and must not exceed 150W for LED/CFL lighting or 600W for incandescent/halogen lighting.