Nexleds 45W/60W/75W Selectable LED Full-Cutoff Adjustable Wall Pack – 3CCT, 120–347V, Bronze
Nexleds Selectable LED Full-Cutoff Adjustable Wall Pack
The Nexleds NX-FCWW-75WCS is a commercial-grade LED wall pack designed for exterior building illumination, entrances, walkways, loading areas and perimeter security lighting. Its adjustable housing can be positioned from 0° to 90°, allowing the fixture to support semi-cutoff and full-cutoff lighting applications.
Field-selectable wattage and colour temperature make it possible to configure the fixture during installation. Choose from 45W, 60W or 75W and 3000K, 4000K or 5000K without stocking multiple fixed-output models.
Key Features
- 3 wattage settings: 45W / 60W / 75W selectable
- 3 colour temperatures: 3000K / 4000K / 5000K selectable
- Adjustable housing: 0°–90° aiming range
- Full-cutoff capable: helps direct illumination toward the target area
- Wide-voltage input: 120–347V AC, 50/60Hz
- 0–10V dimming: compatible with suitable low-voltage dimming controls
- High efficacy: up to 130 lm/W at 5000K
- Weather-resistant: IP65-rated housing for outdoor locations
- Durable construction: die-cast aluminum housing with an anti-UV polycarbonate lens
- Dark bronze finish
- Optional photocell support: photocell is not stated as included
- Rated life: 50,000 hours
- Manufacturer warranty: 5 years
Selectable Output
| Wattage Setting | Approx. Output at 130 lm/W | Typical Use |
|---|---|---|
| 45W | Up to approx. 5,850 lumens | Entrances, pathways and smaller mounting areas |
| 60W | Up to approx. 7,800 lumens | General exterior and perimeter lighting |
| 75W | Up to approx. 9,750 lumens | Commercial façades, loading areas and security lighting |
Calculated lumen values are based on the published efficacy of 130 lm/W at 5000K. Actual output may vary by wattage setting, colour temperature and operating conditions.
Technical Specifications
| Model | NX-FCWW-75WCS |
|---|---|
| Selectable Wattage | 45W / 60W / 75W |
| Selectable CCT | 3000K / 4000K / 5000K |
| Input Voltage | 120–347V AC, 50/60Hz |
| Efficacy | Up to 130 lm/W at 5000K |
| CRI | 80+ |
| Beam Angle | 90° |
| Fixture Adjustment | 0°–90° |
| Dimming | 0–10V |
| Ingress Protection | IP65 |
| Operating Temperature | -40°C to 50°C |
| Housing | Die-cast aluminum |
| Lens | Anti-UV polycarbonate |
| Finish | Dark Bronze |
| Dimensions | 321.1 × 207.7 × 93.5 mm |
| Rated Life | 50,000 hours |
| Listings Shown on Spec Sheet | ETL, cETL and DLC |
Recommended Applications
- Commercial building exteriors
- Warehouses and loading areas
- Entrances and exit doors
- Walkways and building perimeters
- Parking and service areas
- Security and general-purpose outdoor lighting
Installation Notes
Installation should be completed by a qualified electrician in accordance with applicable electrical codes. Confirm the desired wattage and colour temperature settings before closing the fixture. A compatible 0–10V control is required for dimming. The product literature identifies the photocell as optional; confirm accessory compatibility and inclusion before ordering.