Votatec Push Button LED Dimmer Switch – Single-Pole/3-Way – 200W LED, 600W Incandescent – White
Votatec Push Button LED Dimmer Switch
Control compatible dimmable LED, CFL, halogen and incandescent lighting with the Votatec push-button dimmer switch. Designed for single-pole or 3-way applications, this in-wall dimmer combines convenient push-button controls with smooth phase-cut dimming.
The large power button turns the lights on or off, while separate up and down buttons provide precise brightness adjustment. Adjustable minimum and maximum brightness settings help improve compatibility and reduce flickering or dead travel with compatible dimmable LED lamps and fixtures.
Key Features
- Single-pole or 3-way installation
- Compatible with dimmable LED, CFL, halogen and incandescent lighting
- Dedicated push button for on/off control
- Separate brighten and dim buttons
- Smooth phase-cut dimming
- Adjustable minimum and maximum brightness levels
- Helps reduce flickering and unusable dimming range
- Power-off memory recalls the previous brightness setting
- Status and brightness indicator lights
- Overload and over-temperature protection
- Built-in air-gap power cut-off switch for servicing
- Fits compatible decorator-style wall plates
- ETL listed
- Two-year manufacturer warranty
Load Ratings
| Load Type | Supported Load |
|---|---|
| Dimmable LED | 3W–200W |
| Dimmable CFL | 3W–200W, fewer than five lamps |
| Incandescent | 15W–600W |
| Low-Voltage Halogen with Electronic Transformer | 3W–200W |
| Electric Resistive Load | 15W–600W |
Specifications
| Model Number | DNA042CU1-600 |
| Rated Voltage | 120V AC |
| Frequency | 60Hz |
| Maximum Rated Power | 600W |
| Circuit Type | Single-Pole or 3-Way |
| Dimming Method | Phase-Cut |
| Installation | In-Wall |
| Application | Indoor |
| Dimensions | 4.13 × 1.73 × 1.22 in. |
| Housing Material | Plastic and aluminum |
| Finish | White |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10%–90% RH |
| Mechanical Life | 40,000+ operations |
| Standard | UL 1472 |
| Safety Listing | ETL Listed |
| Location Rating | Damp Location |
| Warranty | 2 Years |
Push-Button Controls
- Power button: Turns the connected lights on or off.
- Up button: Increases the brightness level.
- Down button: Reduces the brightness level.
- Luminance indicator: Displays the approximate brightness setting.
- Status indicator: Helps identify the operating status of the dimmer.
- Air-gap switch: Completely disconnects power to the load for servicing.
Adjustable Dimming Range
The minimum and maximum brightness levels can be adjusted to match the connected lamps or fixtures. Proper adjustment can help eliminate visible flickering, dead travel and unstable operation at very low brightness levels.
Use only lamps and fixtures identified as dimmable. Actual dimming performance depends on the lamp, driver, fixture, number of connected lights and total load.
Single-Pole and 3-Way Applications
For a single-pole installation, the dimmer controls the lighting from one wall location. For a typical 3-way installation, the dimmer is installed at one location and a compatible standard 3-way switch is installed at the other location.
Do not install two standard dimmers on the same 3-way circuit unless the lighting control system is specifically designed for multi-location dimming.
Important Load Information
Add together the actual input wattage of every connected lamp or fixture. Do not use the incandescent-equivalent wattage shown on LED bulb packaging when calculating the load.
The total connected load must remain within the rating specified for the applicable lighting type.
Installation Notice
Turn off power at the circuit breaker and verify that the circuit is de-energized before installation. Installation should be completed by a qualified electrician in accordance with applicable electrical codes.
Confirm the line, load, traveller and ground conductors before wiring. Carefully position all wires inside the electrical box and secure the dimmer using the provided mounting screws.