Votatec Weather-Resistant GFCI Receptacle – 15A or 20A, Tamper-Resistant, Self-Test, LED Indicator, White or Black
Votatec Weather-Resistant GFCI Receptacle
Provide reliable ground-fault protection with the Votatec Weather-Resistant GFCI Receptacle. Available in 15A and 20A models, this self-testing receptacle monitors its protective function and uses LED indicators to communicate power, protection and end-of-life status.
The tamper-resistant shutters help prevent foreign objects from being inserted into the receptacle slots, while weather-resistant construction uses enhanced corrosion-resistant components for demanding moist and humid environments.
Choose from 15A or 20A ratings and White or Black finishes to match the electrical circuit and surrounding wiring devices.
Key Features
- Ground-fault protection: Trips when a ground-fault current of approximately 5mA is detected
- Automatic self-test: Regularly checks the GFCI protection function for added safety
- Continuous protection: Designed to detect and interrupt an actual ground fault, including during the self-test cycle
- Tamper-resistant shutters: Help prevent foreign objects from reaching energized receptacle contacts
- Weather-resistant construction: Enhanced corrosion-resistant components provide improved durability in moist or humid environments
- LED status indicators: Provide clear feedback on power, reset, fault and end-of-life conditions
- Fast response: Ground-fault trip time of less than 25 milliseconds under specified conditions
- LINE and LOAD terminals: May provide GFCI protection to compatible downstream receptacles when correctly wired
- Durable thermoplastic housing: Designed for strength, impact resistance and dependable operation
- 15A and 20A options: Select the appropriate configuration for the branch circuit and application
- Two finish options: Available in White and Black
- cULus Listed: Evaluated to applicable Canadian and U.S. safety standards
Available Options
- 15A – White
- 15A – Black
- 20A – White
- 20A – Black
LED Status Indicators
Green Indicator: The GFCI is powered, properly reset and operating normally.
Red Indicator: Indicates a fault condition or unsuccessful internal self-test. Follow the supplied instructions to test and reset the device.
Flashing Red Indicator: On supported models, a flashing red light indicates an end-of-life condition and the receptacle must be replaced.
Important: The LEDs are status indicators. They are not intended to illuminate the surrounding area as a night light.
Tamper-Resistant Protection
Built-in safety shutters help block access to the internal energized contacts unless a compatible plug is inserted correctly. This feature helps reduce the risk of foreign objects being inserted into the receptacle slots.
Weather-Resistant Construction
Weather-resistant materials and corrosion-resistant components provide greater durability in moist, humid and temperature-changing environments than an ordinary indoor receptacle.
Weather resistant does not mean waterproof. When installed outdoors or in a wet location, the receptacle must be installed in a suitable electrical box with an approved weatherproof cover and gasket as required by applicable electrical codes.
Typical Applications
- Bathrooms and powder rooms
- Kitchens and laundry rooms
- Garages and workshops
- Basements and utility rooms
- Commercial washrooms
- Covered outdoor receptacle locations
- Patios, decks and exterior walls with an approved weatherproof enclosure
- Other locations requiring compatible GFCI protection
Product Specifications
| Brand | Votatec |
| Product Type | Weather-Resistant GFCI Receptacle |
| 15A Model | YGB-094WR |
| 20A Model | YGB-095WR |
| Rated Current | 15A or 20A |
| Rated Voltage | 125V AC, 60Hz |
| Rated Power | 1800W for 15A model; 2400W for 20A model |
| Ground-Fault Trip Threshold | 5mA |
| Trip Time | Less than 25ms |
| Short-Circuit Current Rating | 10kA |
| Dielectric Withstand Voltage | 1500V AC |
| Wire Range | 14–12 AWG, subject to circuit and code requirements |
| Wiring Connections | Line, neutral and ground; optional load-side connections |
| Installation Method | In-wall |
| Safety Features | GFCI, automatic self-test, tamper-resistant shutters and LED status indicators |
| Environmental Rating | Weather resistant |
| Operating Temperature | -35°C to 66°C (-31°F to 150.8°F) |
| Dimensions | 4.13 × 1.68 × 1.60 in. (10.5 × 4.28 × 4.07 cm) |
| Material | Thermoplastic and metal |
| Available Colours | White and Black |
| Standards | UL 943, UL 498 and CSA C22.2 No. 144.1 |
| Safety Listing | cULus Listed |
| Warranty | 2 years |
LINE and LOAD Connections
LINE terminals receive incoming power from the electrical panel. The GFCI receptacle itself is protected when the LINE terminals are wired correctly.
LOAD terminals may be used to provide GFCI protection to compatible receptacles located downstream on the same circuit. Incorrect LINE/LOAD wiring may prevent the GFCI from operating correctly.
Testing the GFCI
- After installation, restore power at the circuit breaker.
- Press the RESET button fully.
- Confirm that the green status indicator shows normal operation.
- Plug in a lamp or compatible test device and confirm that power is available.
- Press the TEST button. The GFCI should trip and interrupt power.
- Press RESET again to restore normal operation.
Test the GFCI regularly according to the supplied instructions. Replace the device if it fails to trip, cannot be reset or displays an end-of-life warning.
Before Ordering
- Select the correct 15A or 20A model for the branch circuit.
- A 20A receptacle must be installed only on a compatible 20A circuit.
- Wire size must comply with the circuit rating and applicable electrical code.
- This device requires line, neutral and ground connections.
- Do not confuse weather resistance with waterproofing.
- Outdoor and wet-location installations require a compatible weatherproof box, cover and gasket.
- A wall plate and weatherproof cover are not included unless specifically stated in the selected package.
- Confirm applicable code requirements for the intended installation location.
Installation Notice
Turn off power at the circuit breaker and verify that the circuit is de-energized before installation. Carefully identify the LINE and LOAD conductors before disconnecting the existing receptacle.
Incorrect wiring can result in loss of GFCI protection. Installation must comply with applicable electrical codes and should be completed by a qualified electrician.